Mold Maintenance & Repair

OCT 2013

Mold Maintenance & Repair

Issue link: https://mmr.epubxp.com/i/184512

Contents of this Issue

Navigation

Page 23 of 27

PRODUCTS Mold Cleaner and Saver DME Mold Cleaner removes corrosion-forming substances—including lactic acid, urea and sodium chloride, which are often found in perspiration residues left by the handling of polished cavities. Mold Cleaner provides up to 20 days of rust protection at temperatures up to 120°F and 100 percent humidity, according to the company. It is a protective coating for polished cavities and all metal parts. Its transparent film protects from corrosion and damage. It is soft, dry and waxy, averaging about 0.0003 of an inch thick. For maximum convenience and precision, try the Sure Shot Compressed-Air Spray Canister, which holds a quart of either of these products. It's refillable, reusable and easy to handle. Status Display for Magnetic Chucks Operators will now be able to quickly see whether the MAGNOS magnetic chucks from SCHUNK are activated or not. All of the new square pole chucks will now be offered with an optional permanent display that informs the operator of the clamping status of the magnetic chuck. The display is completely independent from the main energy supply. The magnetic chuck is fixed to the machine table, and then connected by a sealed quick release connector to the control unit. As soon as it is activated, the indicator of the permanent status display changes to green. The display works independently from the power supply, and will be visible even if the power cable has been disconnected after activation of the permanent magnet. With the MAGNOS square pole plates, workpieces can be quickly clamped and are machined in one setup from five sides. If moveable pole extensions are used, a deformation free setup is possible. dme.net schunk.com I got free support and trial samples from Slide q q Technical videos. Free trial samples. Helpful tips. A real person on the phone WITH ANSWERS Watch Technical Videos Get free trial samples at: MakeItSlide.com If you don't want it to stick, make it www.SlideProducts.com 1-800-323-6433 22 Mold Maintenance & Repair

Articles in this issue

Links on this page

Archives of this issue

view archives of Mold Maintenance & Repair - OCT 2013